Compare our wheel weights to the major brands,
We are as light or lighter than Zipp, Fast Forward, Hunt, Reynolds, DT Swiss
and all the others.....
As an example our PRO SL Hubs weight 246gms almost 100gms lighter than DT SWISS 240's. The have 6 pawls for fast engagement, low click noise, straight pull and have ceramic bearings. Our PRO SL range are less than half the price of the top brands. Why pay more?
ZUUS WHEEL RANGE WHEELSET WEIGHT COMPARISON
AERO RANGE - £549.99 - 10% TODAY (USE COUPON CODE ZUUS10)
PRO RANGE - £649.99 - 10% TODAY (USE COUPON CODE ZUUS10)
PRO SL RANGE - £795.99 - 20% TODAY (USE COUPON CODE ZUUS15)
38MM RIM DEPTH
50MM RIM DEPTH
60MM RIM DEPTH
88/60MM RIM DEPTH
AERO - 1787GM CLICK HERE AERO DISC - TBA
PRO - 1744GMS CLICK HERE PRO DISC - TBA
PRO SL - 1660GMS CLICK HERE PRO DISC - TBA
To discuss these new sets please call 01539 766959 or email firstname.lastname@example.org or click live chat
- AERO RANGE SAPIM RACE
- PRO RANGE SAPIM RACE (SAPIM CX-RAY UPGRADE AVAILABLE FOR £99)
- PRO SL RANGE SAPIM CX- RAY SPOKES AS STANDARD
Unlike our competitors we do not offer cheap Pillar spokes
POWERWAY R13 HUB J-BEND SPOKES STEEL BEARINGS. 3 PAWL ENGAGEMENT
BITEX 303 SUPERLIGHT/ STRAIGHTPULL HUBS CERAMIC ZUUS GLIDE PRO. 6 PAWL ANTI BITE ENGAGEMENT. ANTI GOUGE FREE HUB PROTECTION
PRO SL RANGE
BITEX 303 SUPERLIGHT/ STRAIGHTPULL HUBS. ZUUS GLIDE PRO CERAMIC BEARINGS 6 PAWL ANTI BITE ENGAGEMENT. ANTI GOUGE FREE HUB PROTECTION
ZUUS WHEELS AERODYNAMICS
All our wheels share the same Aero 'Oval' rim shape proven to be the best performing in wind tunnel testing.
Strength, durability, weight and aerodynamic performance all built into our wheelsets. Our rim suppliers engineers understand all these factors and are constantly updating the designs.
We use an oval rim design favored by the larger named brand manufacturers. Through intensive research and testing of numerous rim shape, wind tunnel testing and in-depth analysis of real world wind conditions. The initial design was based on the theory that ineffective winds a rider experiences tend to fall within a lower yaw angle range than the 10-20 degrees.
The oval profile is designed to acheive optimal aerodynamic performance by reducing drag around the wheel in both frontal and cross wind conditions by creating a negative pressure section that compresses and speeds airflow over the rim, thus reducing drag while also increasing stability
The yaw angle is the calculated real wind angle when the speed of the actual wind (effective wind) and the wind speed produced by the rider (apparent wind) are taken into consideration.
More speed.We developed our Carbon Clinchers, concentrating not only on the front half of the wheel, but also the back half. Oval rim shapes were designed to smooth airflow coming off the tyre, and tapered inward from the widest point of the bulge. this maintains more stability in windy conditions, far better than V-shaped rims.
Made from Japanese Toray T1700 carbon, 26mm wide (19mm internal) will fit 23, 25, 28, 32mm tube and tubeless types
Rims: No Burnouts. Highly effective Basalt braking surface which perform well in the wet and the dry. We have been using this rim on our wheels since 2014 with no warranty issues.
AERO DISC RIMS
Plain Clean UD Matt Finish (no braking surface)
PRO AND PRO SL RIMS LIGHTER THAN OUR AERO RIMS WITH A CLASSY 'AS GOOD AS ALLOY' CARBON WEAVE BRAKING SURFACE FINISH
DISC RIMS ARE PLAIN CLEAN UD MATT CARBON (NO BRAKING SURFACE)
Made from Japanese Toray T700 carbon, 26mm wide (19mm internal) will fit 23, 25, 28, 32mm tube and tubeless types.
Rims: No Burnouts.These rims are lighter than the Aero rims with a 4k carbon weave applied to the braking surface. This is a very effective way to increase braking surface further in both the wet and dry. As effective as alloy.
When you purchase our wheelsets we give you the option to buy both tube and tubeless types at the same time. These days we fit far more tubeless than tubed.
ZUUS PRO RIMS 2-Way Tubeless Clincher Rims.
Use either traditional tyres with tubes, or tubeless tyres without tubes. Tubeless tyres can provide lower rolling resistance and better protection from punctures.
There are a few distinct advantages to this:
1. Normally if you run a moderately low tire pressure (Under 100psi), you'll experience noticeably increased rolling resistance. A lot of this rolling resistance comes from friction between the tyre and the tube. The lower the pressure, the more the tube is stretching and moving in the tire as it rolls, creating friction and rolling resistance. By using a tubeless tyre, you can eliminate the increase in rolling resistance associated with lower tyre pressures.
2. With traditional clincher tyres and tubes, If you want to run a low tyre pressure (under 80psi), for cyclocross, grave grinding, or other situations needing increased traction, you increase the risk of pinch flats. With a tubeless setup, not having a tube, and having tubeless sealant, your tire can self-heal small punctures without significant air loss. This means you can run low tyre pressures, with a tubeless tyre, at a decreased risk of pinch flats.
3. You can use either tubeless or clincher tyres, the choice is yours. The ZUUS PRO rims are compatible with both. There is no disadvantage to a normal clincher tyre and tube setup with this rim, only the advantage of the option to use tubeless tyres.
Tubes or No-Tubes - You Choose.
PRO AND PRO SL HUBS
The difference between our PRO and PROSL hubs is that the SL's have Ceramice bearings and in spin tests revolve 4 times longer. If you have the budget always upgrade to the 'SL' sets as they also have SAPIM CX-RAY spokes as stands (offered as an upgrade on the Pro standard range)
ZUUS™ PRO RIM HUBS 264g
PRO WHEEL SET WEIGHTS START AT 1384GMS (38mm)
Straight Pull Spokes, Stronger, Lighter and Faster.
ZUUS™ PRO and PRO SLhubs. Super light weight. High Tensile 7075 Axle. 6 Pawl Free Hub body, low click noise, silky smooth engagement. Steel Spline Insert (All in All Light and Bomb Proof) 20 Front / 24 Rear Sapim Race spokes.
PRO HUBS COME WITH STEEL BEARINGS AND ALLOY SKEWERS (140gms)
PRO SL HUBS COME WITH CERAMIC BEARINGS AND TITANIUM SKEWERS (120gms)
PRO RANGE HUB ANTI BITE SYSTEM - (PRO AND SL)
NO MORE GOUGED FREEHUB BODIES
No more gouged free hub bodies. We have developed a steel spline inserts to help reduce the unsightly marks left by cassettes. This also reduces free hub body failures. This is patented.
PRO RANGE SUPER SMOOTH 6 PAWL ENGAGEMENT (PRO AND PRO SL)
NO MORE LOUND 'CLICKING' NOISE
6 Pawls for reduced click noise. Instant engagement which reduces the space between points of engagement by 50%
ZUUS PRO GLIDE CERAMIC BEARINGS
Our PRO SL range come with PRO GLIDE ceramic bearings as standard. In spin tests ceramic bearings have shown to spin four times longer! If you have the budge always upgrade to the PRO SL's
There are no products listed under this category.